All top polishers come with the following:
- Ball Bearing Lift Screws on the Raise and Lower
- Linear Guide Bearings
- 5HP – 3Phase Spindle Motor
- Mitsubishi PLC and a Mitsubishi GOT on the Control System for Programming
- Spindle Shaft
- Pendant Control Push-button Station for Manual Operation
- 20 ft. of 2″ CF Rails and Direct Drive for the Runway
- 8-Button Wireless Remote Available
- Top Polisher with Head Changer has an 8 Head Rack
- Top / End Polisher has a Tilt Latch Assembly for Polishing Ends